
Custom Length Single Color LED Strip Light - Eco Series Tape Light - 24V - IP20

Features
- 24V For longer continuous runs - Up to 32'
- Can be cut every 4"
- 3M™ Adhesive backing
- Lifetime warranty
- 0-100% Dimmable
- See accessories for controllers, power supplies, connectors, and channels
Save 10% On Your Entire Order using code MEMDAY22
Overview
Eco Series flexible LED strip light operates on 24 VDC and can be used in longer runs than 12V strips. It emits up to 150 lumens of warm white, natural white, cool white, blue, green, red, yellow, pink, amber, UV (blacklight), or purple light per foot. The LED tape light can be easily cut into separate 6-LED segments and installed with its peel-and-stick 3M™ adhesive backing. Minimum length is 3.28'. Run the strip back to power every 32' to avoid excessive voltage drop. This LED strip light is covered by a lifetime warranty. It's great for cabinets, under-cabinet lighting, coves, bookshelves, or other indoor applications where space is limited. See high-density version.
Custom-length strip sections are cut from a larger reel and will not have wire leads. Soldering or the use of solderless connectors (sold separately) is required. See accessories for compatible connectors.




What is the difference between 12V and 24V strip lights?
12 volt and 24 volt strips are extremely similar. They look the same, are capable of the same light output, and have identical costs. There are some key differences between the two which matter depending on application. For instance 12 volt strips can be connected directly to your vehicle's 12 volt electrical system. While 24 volt strips on the other hand allow for longer runs, or higher densities of LEDs over their 12 volt counterparts. For the maximum run of a strip see Max Run in the specification table for more information. Read More »
How long of a run can I make my strip?
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. Please refer to the Max Run spec listed in the specification table of each product information page for specific information about each strip. Read More »
What accessories do I need?
The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.
How bright is the strip? What are lumens and how many do I need?
Lumens are the measure of how bright an LED strip will be when in use. The higher the lumen rating, the brighter the strip will be. Higher lumen strips are usually better for under cabinet and task lighting. Lower lumen strips are typically used for accent lighting applications.
What is color temperature? Which one is best?

Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.
Specifications
Click any blue question mark for specification details and explanation.
Part NO | Color Temperature | CRI | Dimensions | Environmental Rating | Constant Current | Input Connection Type | Current Draw | Dimmable | Wattage per Foot | Current Draw Per Foot | Brightness |
---|---|---|---|---|---|---|---|---|---|---|---|
STN-A30K80-B6A-08B1M-24V | 3000 K | 80+ | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | 150 lm/ft |
STN-A40K80-B6A-08B1M-24V | 4000 K | 80+ | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | 150 lm/ft |
STN-A50K80-B6A-08B1M-24V | 5000 K | 80+ | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | 150 lm/ft |
STN-A65K80-B6A-08B1M-24V | 6500 K | 80+ | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | 150 lm/ft |
STN-BRED-B6A-08B1M-24V | - | - | - | - | - | - | 0.90 A | - | 1.3 W/ft | 55 mA/ft | - |
STN-BGRE-B6A-08B1M-24V | - | - | - | - | - | - | 0.90 A | - | 1.3 W/ft | 55 mA/ft | - |
STN-BBLU-B6A-08B1M-24V | - | - | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | - |
STN-BYEL-B6A-08B1M-24V | - | - | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | - |
STN-BPIN-B6A-08B1M-24V | - | - | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | - |
STN-BAMB-B6A-08B1M-24V | - | - | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | - |
STN-BULV-B6A-08B1M-24V | - | - | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | - |
STN-BPUR-B6A-08B1M-24V | - | - | - | - | - | - | 0.93 A | - | 1.4 W/ft | 57 mA/ft | - |
![]() |
Accessories & Power Supplies

Reviews
Overall Rating
Total Reviews
Tell Us What You Think
Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.
Works great for our purpose of highlighting steps in our theater room. Seem plenty bright for this purpose and have them on a pwm dimmer and have them dimmed quite when the room is dark. Only complaint would be the adhesive can be pulled from the strip when trying to remove the paper/plastic backing... so just be careful there when starting to peel it back.
great lights, watch the tape
only ordered 1 meter so ends came tinned but without wire. if you are going to cut these be aware of the tinned ends and the polarity. I had to remove the tin which was not an easy process. there is also tape on the back covering the contacts so make sure you remove that before inserting into any type of clamp connector. other that that these are fantastic lights and very bright.