store image

Surface Mount LED Panel Light - 1x4 - 4,100 Lumens - 40W Dimmable Even-Glow® Light Fixture

Part Number: LPD-x14-40
14 photos


  • Step Dimming- no need to run dimming wires
  • Even-Glow® Light Guide Panel - zero hot spots
  • Internal driver is concealed in the frame- perfect for surface mounting
  • Durable aluminum alloy frame
  • 7 year warranty
Select Frame:
White Aluminum
Black Aluminum
Select Mounting Option:
Drop Ceiling
Surface Mount
Out of Stock
Starting at $122.95 / kit
Volume price as low as $110.66
Orders ship on or before  Tuesday 01/25/2022
  • Select options to see various notes.


LPD series is a modern replacement for T8 fluorescent tube fixtures. Even-Glow® technology creates a uniform distribution of light while the optical diffuser eliminates any visible hotspots. Step dimming suits various application needs; no need to run dimming wires for retrofit installations. Because its driver is built into its frame, the panel can be mounted directly to a junction box and flush against the ceiling. Both durable and lightweight, the aluminum alloy frame is an ideal solution for kitchen lighting, office lighting, and general commercial lighting.

Product Details:
  • Replaces 1-lamp 32W fluorescent T8 fixtures
  • Even-Glow® technology and optical diffuser delivers uniform light
  • 0.68” thickness
  • 110° beam angle
  • 100~277 VAC
  • Suspending mount hanging kit sold separately
  • LM-79 Certified
  • 7 year warranty
7 Years
Super Bright LEDs, Inc. offers a 7-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
ETL Listed
A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.
  • Sign Lighting
  • Commercial Suspended Grid Ceilings
  • Residential Suspended Grid Ceilings
  • New Constructions
  • Light Box Lighting
  • Hospitals
  • Schools
  • Hotel Lighting
  • LED Display Lighting
  • Gymnasiums
  • Trade Shows
  • Basements


Swipe left to see additional specifications
ImagePart NOSeriesPrice Ea.Constant Current
Lumen Per Dollar
LPD-40K14-40-JBKLPD/Even-Glow®$122.95-33.35 lumen/dollar
LPD-40K14-40-SMKLPD/Even-Glow®$137.95-29.72 lumen/dollar
LPBD-40K14-40-JBKLPD/Even-Glow®$122.95-33.35 lumen/dollar
LPBD-40K14-40-SMKLPD/Even-Glow®$137.95-29.72 lumen/dollar

 Specifications & Mounting Options

Mounting Option
  • Drop Ceiling: This option provides an enclosed space for wire connections and is meant for use when panels are recessed or suspended.
  • Wall and Drywall Ceiling: This kit allows for easy LED panel light installation. It includes 1 mounting plate with a slotted design for compatibility with multiple size J-boxes allowing for this kit to be used with your current J-box. Hardware is included for securing the light panel to the surface of your ceiling and to your current J-box.
  • This product should be installed by a fully certified electrician in accordance with local building and electrical codes.
  • Due to risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
  • Do not install insulation within 2 in./51mm of any part of the panel light fixture.
 Step Dimming Instructions:

Step dimming module allows the panel to be set to 3 different brightness intensities.

When the panel is powered on it will automatically be set to 100% brightness. There are three brightness modes of 100%, 50%, and 10% brightness. You can step through the brightness settings in order power cycling the panel for more than half a second, but less than 2 seconds.

The panel can be reset to 100% brightness at any time by powering off the panel for 3 seconds or more.

LPD-x14-40 - Even-Glow LED Panel Light Fixture - 1' x 4' - 4,100 Lumens - 40W Dimmable
Even-Glow LED Panel Light Fixture - 1' x 4' - 4,100 Lumens - 40W Dimmable
LPD-x14-40 - Dimmable 40W LED Panel Light Fixture - 1ft x 4ft - Ceiling Surface-Mount Kit
Dimmable 40W LED Panel Light Fixture - 1ft x 4ft - Ceiling Surface-Mount Kit
LPD-x14-40 - Even-Glow LED Panel Light Fixture - 1' x 4' - 4,100 Lumens - 40W Dimmable
Even-Glow LED Panel Light Fixture - 1' x 4' - 4,100 Lumens - 40W Dimmable



Overall Rating

Total Reviews


Tell Us What You Think

Share your own experience and photos of this product. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.

Sign In Required to Write a Review
Click here to sign in to your account
Technical Level
Part Number
Reviewed On

Mounting bracket is the death of me

The light is great- plenty of light and a good temperature.

The sticking point is the mounting bracket. I purchased two of these things and neither of the mounting brackets lined up with the frame of the light. Nothing more frustrating than holding a panel above your head, trying to get 4 minuscule prongs to line up.

There has to be a better way to manufacture these things to attach the panel to the wall/ceiling.

Helpful? Yes (4) No (0)

Technical Level
Part Number
Reviewed On

Kitchen lights

These light are great for a kitchen I put 4 in on a 45 degree angle and now there are no dark corners in my kitchen they are easy to install and wire up and I installed dimmers and a motion detection switch.

Helpful? Yes (2) No (0)

Technical Level
Part Number
Reviewed On

Super Bright, Super Easy

The holes on my template lined up just right. Installation was easy - well - should have been easy but I was a nimnod and didnt read the wiring directions correctly so mine currently dont dim. After I pull new wires that should be fixed. The installation of the lights themselves was flawless and simple. They are super bright and work well in the kitchen. I installed two of these in my 10x15 kitchen and probably one would do the job well enough. Recommend the light panel. Seems well thought out and is one of the few that you can surface mount easily to a flat gyp ceiling.

Helpful? Yes (1) No (0)

Technical Level
Part Number
Reviewed On

Packaging is terrible.

Love the light, but first mounting bracket came and was unusable. 2nd one was almost as bad. Had to fix 2nd mounting bracket so I could install light.

Helpful? Yes (0) No (0)

Response from Super Bright LEDs:

Customer service and quality are very important to us. Please contact our Customer Service team. We would be happy to work with you in finding a solution to your issue.

Technical Level
Part Number
Reviewed On

Keep shopping

Check your lumens! This was no where near as bright as the florescent fixture it replaced. Absolutely a PITA to hang too. Ended up getting another fixture from Home Depot to supplement this one. The Commercial Electric fixture from Home Depot was less expensive and WAY easier to put up.

Helpful? Yes (0) No (0)

Response from Super Bright LEDs:

We are sorry to hear that the light did not work out for you. Please contact our Customer Service team. We would be happy to work with you in finding a solution to your issue.

Send us your Feedback